If you want a more sporty looking glove you may like the XR-12 heated gloves. The other type of heated gloves from the 12 volt line is the G-12 which have a short cuff to put it under your motorcycle jacket. Because of the use of Stainless Steel Microwire® heating, it is the most durable glove in the world! The T-12 heated gloves heats the entire length of each finger, including the thumb, as well as the back of the hand within seconds after plugging in. The T-12 heated gloves are from the hybrid heating line of heated gloves, which means the small B12V-1400 batteries can be stored in the cuff of the heated glove if you choose for not being connected to the vehicles battery.
The battery have 3 heat settings which will give you autonomeous heat for up till 3 hours. When connected to the bikes battery, it will give you unlimited heat.
It’s finally here: Gerbing has a heated ladies glove! The electrically heated W-12 ladies motorcycle heated gloves are specially designed for smaller ladies hands. A storage compartment in the cuff makes it possible to connect the battery to the motorcycles battery or to connect with the portable 12 volt batteries.
The W-12 engine heated glove is the first in the collection of hybrid gloves to place the pocket for the batteries underneath the wrist. This is in contrast to the T-12 heated glove and-XR 12 motorcycle gloves where the battery pocket is on top of the wrist.The heated womens gloves also has hard knuckle protection for extra safety.
Aquatex® breathable membrane for protection against water and wind
Adjustable wrist strap
The heating wire is not noticeable because of the use of the Dutch patent on the heating technology
Thinsulate® insulation and brushed liner for added warmth and comfort
Each pair of W-12 heated gloves for ladies comes with a battery cable and a junior controller for connection to the motorcycle
Optional B12V-1400 KIT for heating the glove
W-12 heated motorcycle gloves can also be connected to the B12V-5200 or B12V-8000. Note, however, that you have to use a normal y-cable, because the junior controller will not work in conjunction with either of these batteries for heated clothing.
Naturally, the W-12 heated glove features the Dutch patented heating system that is also used in our other 12 volt heated gloves and heated gloves 7 volts. And of course, the W-12, can be just like any other 12-volt heated motorcycle gloves connected to the Gerbing heated jacket.
Very comfortable heated motorcycle gloves, with a European patent pending heating system, made with an exceptionally soft and supple drum-dyed premium leather that contours to the hand. The design is sleek, stylish and very functional as a light, but strong pliable heated gloves designed for high speed use.
Unlike the T-12 heated gloves and the XR-12 heated gloves, the G-12 gloves have a short cuff. This means that there is no room to store the B12V-1400 batteries in the cuff of the heated gloves. The cuff is designed to be short, so it can be put under your motorcycle jacket when it rains. To make the G-12 heated gloves hybrid, a B12V-5200 battery or a B12V-800 battery must be used. Make sure you buy the normal y-cable with the gloves, since the junior controller will not work on a battery from Gerbing. The battery itself already has a build in temp controller, so does the junior controller.
The G-12 heated gloves are almost a heated spring or fall glove, since it’s extremely supple and thin.
Heats the entire length of each finger, including the thumb, as well as the back of the hand within seconds after plugging in
Waterproof/windproof/breathable Hipora® liner to provide protection from water and wind
Adjustable wrist enclosure
Thinsulate® insulation and brushed liner for added warmth and comfort
The heated motorcycle gloves are provided with an inline Junior Temp controller, to adjust the heat.
The G-12 heated gloves can be worn by themselves or easily be connected to the plugs coming out of the heated jacket. Make sure you have a dual temp controller or a splitter when you have both heated gloves and a heated jacket.
Gerbing’s innovative and revolutionairy European patent pending new Microwire® heated gloves. The best of two worlds. If you’re cruising for hours, just connect these gloves the usual way, with Gerbing’s battery hook-up. Just riding for an hour? Plug in the small portable batteries.An extremely comfortable and safe glove made with an exceptionally soft and supple drum-dyed 0.6 mm premium full analine leather that contours to the hand. The design is sleek, very modern, stylish and very functional as a light, but strong and sporty looking pair of heated gloves.
Because of the use of Microwire® Heat, it are the most durable heated gloves in the world! Don’t look further: the XR-12 is an award winning motorcycle glove, with extra protection on the knuckle for not only a sexy look, but also extra safety.
The B12V-1400 hybrid batteries can be stored in the cuff of the heated gloves, if you choose for using the heated gloves for just a short amount of time. On the lowest setting it will give you 3 hours of heat. But when you connect it to the battery hook up, which comes with the XR-12 heated gloves, you can drive for hours and hours.
Heats the entire length of each finger, including the thumb, as well as the back of the hand within seconds after plugging in.
Waterproof/windproof/breathable Hipora® liner to provide protection from water and wind.
Adjustable wrist enclosure.
Extra protection on KNUCKLES of the hand.
Thinsulate® insulation and brushed liner for added warmth and com.
Gloves are provided with an inline Junior Temp controller, to adjust the heat.
12V Batteries optional.
Also the XR-12 heated gloves can easily be connected to the Gerbing heated jacket, which have the glove plugs coming out of the sleeves.
A textile heated glove which can be used for scooters or quads or other low speed vehicles. Those heated gloves are unlike the motorcycle gloves G-12, T-12 and the XR-12 heated gloves for low altitude and low speed only! Not recomended if you ride a motorcycle or other high speed vehicles!
You can power the TEX-12 heated gloves with the battery of a vehicle through the battery hook up, or make it hybrid with our B12V-5200 or B12V-8000 battery kit. Make sure you buy the y-cable for those, since the junior controller which comes with the product will not work on a portable battery from Gerbing (they already have a built in controller). These heated gloves are waterproof by a Hipora® breathable memrane, which will keep your hands dry, but not sweaty.
Contoured fitting stretch cordura fabric which gives the gloves a snug fit as those particular heated gloves are designed for multiple tasks.
Heats entire length of each finger all around, including the thumb, as well as the back of the hand.
Our European patent pending Microwire® heat technology is incorperated in those heated gloves, which makes it the most efficient and durable heating technology ever developed.
The TEX-12 heated gloves are provided with an inline Junior Temp controller, to adjust the heat.
You can also power the gloves with an optional battery.
Those TEX-12 heated gloves, as all of our 12 volt heated gloves can also easily be connected to the sleeve plugs of the heated jacket. Make sure you either buy a dual temp controller, or a splitter to make it function all well.
Very comfortable glove made with an exceptionally soft and supple Lycra that contours to the hand. The design is simple but effective.
Firm fitting stretch cordura fabric allows for a snug fit as these gloves are designed to be worn under existing gloves or mitts. Not recommended for motorcycle use, since your existing motorcycle gloves will become too small to have the heated glove liners underneath. For motorcycle use we recommend the XR-12 heated glove, the T-12 heated gloves or the supple and thin G-12 heated gloves. Recommended for use with uninsulated riding gloves, which are one or two sizes too big.
Heats entire length of each finger, including the thumb, as well as the back of the hand.
Adjustable Neoprene cuff to make it comfortable to wear.
Can easily be connected with a normal y-cable to the B12V-5200 or B12V-8000 battery.
Gloves are provided with an inline Junior Temp controller, to adjust the heat when connected to a vehicles battery.
The battery hook up are provided with the heated glove liners as well. If you only use the gloves, make sure to use the right fuse
If you want to use the heated glove liners together with our heated jacket liner, make sure you buy a splitter or a dual temp controller. The L-12 heated glove liners can easily be connected to the sleeve plugs of the heated jacket liner. But since the jacket liner have a dual wiring system, the splitter or dual temp controller must make it one heating system again.